Aqua Mix Sealers Choice Gold - Quart

Used for new bathroom shower tile (wall and floor) and entire bathroom floor. Used two coats on the shower grout and one coat on the bathroom floor grout. so far, so good. Easy to put on, I was semi neat in application (not so much on penny-tile on shower floor) with several 2" foam brushes. First coat really soaked it up. Followed instructions (let it soak for a couple minutes, and damp wipe off surrounding tiles. It left no residue. This was new tile/grout application, I suppose you would need to really clean grout first on an older floor.

Aqua Mix Sealers Choice Gold is the best sealer I have ever used! It went on easy after I cleaned the grout in my shower. I applied it with a foam brush and allowed it to dry several hours and applied 2 more coats allowing to dry between coats. After applying 3 coats, I didn’t use my shower for 24 hours. There was no smell from this product which made it even better and clean up was easy. To my surprise, this product worked! I could see the water beading on the grout. After more than a week of using my shower since applying, I am still happy with the results. If this product last more than a year, I will be thrilled!!!

This is my first time using a sealer so I can’t really compare it to other brands, but overall it did what I expected. It was very easy to apply and did not leave any streaks or haze on my travertine, which I was worried about. I was able to use the shower about 6 hours later with no issues. You can clearly see the water beading and not soaking in at first. After almost a month of daily shower use, I do notice that in the areas that stay constantly wet the travertine is starting to absorb water again, especially on the shower floor. So it seems the sealer wears down faster in high moisture areas. I’ll probably need to reapply it just in those spots, but overall it worked well and was easy to use.

Used Aqua Mix Sealer’s Choice Gold on my shower tile grout and it works excellent. Very easy to apply, no mess, and it seals extremely well. Water beads up nicely and the grout stays protected without changing color. High-quality sealer and very efficient—highly recommend.

Seals really well. Has been 4 months so far in a shower and still perfectly white grout.

We built a custom home and discovered after a couple years that our grout was not sealed. After a thorough cleaning and allowing to dry, I applied the Aqua Mix product. It was very easy to apply and soaked in easily to the grout. Make sure you have your fan on as the fumes are a bit strong. Any excess that you get on the tile, can be easily removed by dampening a rag with the sealer and then wiping the tile down. It will remove any runs on vertical tile. For the shower basin, I poured small areas and used latex gloved hands to spread the sealer evenly. Then I used a grout sponge and rag to soak up any excess. I applied 2 coats a couple of hours apart. After 6 weeks, I have no soap scum buildup like before and the tile and grout is easier to clean. One tip, use a ph neutral cleaner and the sealer will last longer.

I applied one generous coat Aqua Mix Sealer's Choice Gold (Rapid Cure Formular). I really worked it into the grout with a paint brush and with a foam paint roller onto our kitchen floor stone tile. I had two windows open during the entire time. I wiped off any excess of the sealer but apparently not well enough. The next day there was visible white residue on all the floor tiles which didn't look pretty at all. First, I tried to get it off with soapy water - it wouldn't work. Then, I tried a few other things, nothing worked. Finally, I applied some White Vinegar (undiluted) and it easily removed the white residue! If you have the same issue, be careful: a) don't pour the vinegar directly onto the tile. It will create a vinegar stain and remove all your good work on just that spot - even if you spread out the vinegar over the rest of that stone tile right away. b) After doing that mistake twice, I put the White Vinegar onto a folded cloth diaper and carefully wiped over the tile (not the grout) 1-2x . I didn't wipe any more because I didn't want to remove the entire sealer. And it worked! All the excess white residue is gone and there is still sealer on my tiles and grout. I tested it by pouring some water onto the stone tiles and grout (various spots) and saw that round water drops were forming. So the sealer is working. Additional note: I thoroughly cleaned all the stone tiles and grout with a Karcher Steam Cleaner (Multi Purpose) before I applied the Aqua Mix Sealer's Choice Gold. That steam cleaner really removes the dirt.

Great product