GenieBidet Hybrid LEAK-STOP Brass 3-Way T-Adapter for Bidet with ON/OFF. Hand-Nut resists cross-threading. 3/4 X 3/4 X 1/2 ID/OD threads. Fits all Fill Valves. Already Included with our seat bidets.

I purchased this to go with my new Luxe Neo 120 bidet attachment. The Luxe came with both plastic and metal T adapters, but neither had a lever to control the water pressure to the bidet. The beauty of the lever is that it doesn't affect water pressure to the toilet tank, but can decrease pressure to the bidet as well as shut off the water to the bidet if needed. It was easy to install and included a rubber washer (plus an extra one). I applied teflon tape on the metal connections to the supply hose and bidet hose, but did not for the plastic connection to the toilet tank. No leaks! Just make sure you check inside the toilet tank - when tightening the adapter, the float mechanism was pushed up against the tank wall, so the tank wouldn't stop filling. Easy to fix, but something to pay attention to while installing. Very happy with this high-quality adapter!

I tried some other T-valves, and they didnt work. Most are from China where the thread standards must be slightly different. They dont quite fit the threads of American Toilets, and can actually strip your plastic toilet pipe. This one thread perfect. Also, the others have metal nuts with not much threading. This one has a plastic head, that threads very deep into the toilet. Its a good quality valve, it is super smooth when turning on to off. This was the only one I tried that actually worked. The only drawback, is that the part that screws to the toilet is plastic, which is fine, but has a flat washer. A plastic connector like this should have a cone washer. That is the reason so many reviews mention leaking. I just took a cone washer from an extra toilet water hose I had, and put it on top of the washer already in the valve. Also, make sure the washer in the valve is completely seated before installing.

I purchased my home 7 years ago and since then I have done 95% of my own Plumbing I've replaced hubs for my in-ground sprinkler system. Removed and replace my dishwasher removed and replaced my garbage disposal I have removed and replaced toilets, so I decided to install my own bidet. I figured this was a 30 minute task seeing that I got a simple model with hot water. While looking up and researching the bidets I came across this adapter decided it was not needed. Fast forward 2 weeks later with a constant leak in my master bathroom to the point where I had to shut off the water to the toilet because NOTHING, I did could get rid of a leak from the toilet tank to the first connection of the water line. At my wits end I went back in my Amazon account and found this adapter that I had saved for later and ordered it. I did take heed of the reviews that warned the cone washer is not in this adapter so I supplied my own cone washer and in three and a half minutes my leak issue was GONE, this adapter is super easy to install and it is exactly what is needed to make sure you have a secure leak free installation of your new bidet.

I purchased a Kohler toilet seat/bidet combination product that came with an all metal T-adapter that no many how times I tried I could not get to thread onto my toilet correctly. I ended using a wrench to tighten it as much as possible but it still never worked correctly, and slightly damaged the thread. I purchased this and it worked so much better, went on with ease and has been leak free so far! I did have a problem where the water kept running even though there was not a leak anywhere, I eventually realized that while tightening this it turned the ballcock and that just needed to rotated back into the correct position which was easy enough. Very happy with the purchase, would not have been able to use my bidet at all without this!

I chose this T-Adapter because the one that was included in the bidet package seemed to be less rigid and lacked the threads for braided faucet hose (1/2 to 3/8 with a Coupling adapter 3/8 OD to 3/8 FIP for bidet side). It’s well made and works perfectly, but does not come with a beveled washer for tank connection. I just removed the beveled washer from the one that came with the bidet and used it with this brass T-Adapter. Good luck and thanks for reading.

Unfortunately the first bidet I bought came with a cheap all metal 3-way adapter without a shut-off valve so I bought this better made GenieBidet with a shutoff valve to replace it. I appreciate the well designed deep threaded plastic connection that will not damage the plastic threads at the toilet connection like the metal one can do. Connection was easy without any leaks. Highly recommended!

I ordered this T Valve to use attach a bidet to a toilet. It is made well and has a turn-off valve to block the incoming water. Works better than the one that came with the bidet because it doesn't leak.

This was much nicer than the plastic adapter that came with my Luxe Neo Bidet. That one had started leaking after a year, and it did not have it's own shutoff. Installation was easy. All connections were hand tightened, and I used a wrench to tighten the hose connections another 1/4 turn to snug them. The shut-off feature is nice. My bidet, when at full strength, feels like it could bore a hole through concrete. Now that I have a separate shutoff, I can adjust the flow to the bidet for a nice soft spray. It's also nice to know I can shut it off so that my kids don't accidentally play with the lever and spout water all over the bathroom. I would say this unit is a must-have for bidet installations.

This is a great product. Very easy to install, high quality material.

As intended, dont have leaks anymore

The bidet I bought came with a metal T-adapter but it was cross-threading with the plastic toilet fill valve and it would leak no matter what I do. I installed this and there were no leaks!! I highly recommend this product if you are having the same problem.

Quality and price are very good. Arrived promptly. Not sure how the feature to prevent accidentally turning it on (child proofing) is engaged.