Apoxie Sculpt Modelling Clay – White

Best two part epoxy resin out there. sets rock hard and is drillable, sandable and can also be tapped if needed. Great for small repairs and also full model builds.

I bought this to make some props for a costume so I needed something durable, easy to use, that air dries and had a good working time. This product pretty much fulfills all of those requirements. It's easy to work with and adding a little water can help make it that much easier if required. It bonded fantastically with the base board I was using. It's smooth and handled right with the right tools you can get a very smooth finish. It sands well and you can do some carving to this after it has dried if carving it while it is workable is not possible or suitable. I cannot recommend this enough.

Very easy and simple to use, works a lot like clay. I use it as a way to tidy and clean 3D printed objects, and find it one of the best methods of creating smoother surfaces for them (along side sanding)

Rock solid when cured and a breeze to sand. Very sticky to begin with and a bit of a learning curve if your used to clay. Bonds brilliantly to plastic.

Fantastic stuff. Wish I had found it a long time ago.

Apoxie Sculpt is an iconic product and well known and used in the world of modelling. It is a two part resin based compound that gives incredibly good results although the price tag is on the high side, but well worth it given the finished result. I have experimented with making my own version of a sculpt able modelling product and have achieved as near to perfect as I can get it but it still shrinks more than Apoxie Sculpt when dried. Apoxie Sculpt does need to be thoroughly mixed before use and it is important to get the quantiles right before mixing. To achieve this I use highly accurate balance scales or digital scales, otherwise the results can be slightly inferior or it becomes unworkable too quickly or takes far too long to dry.

Excellent product, it is exactly what it says it is, nothing hidden. And arrived before it's time

Product arrived as described.

Great stuff but: 1. It does not dry anywhere near “white/stone white” it’s more of a grey. Yes you can paint it but if you’re painting it white, it requires many layers and this obscures surface detail. 2. Difficult to sculpt with gloves on, so you’re basically forced to expose yourself to a toxic material. For me it creates dry/irritated skin. 3. Beyond those two things, fabulous product that is no less than a life saver if you need to add to an already baked polymer clay sculpture that can’t be further baked.

Great

Merece cada euro que se paga por ello. Genial para esculpir, sea lo que sea. Tienes un tiempo muy decente de trabajo antes de que se seque y así poder corregir cada error. Es epoxy, es decir, es super resistente y se adhiere a cualquier cosa. No se malgasta porque coges y mezclas lo estrictamente necesario, es casi como plastilina y además no es tóxico como cualquier otro Epoxy. En serio, merece la pena comprarlo.

I know, people here think that this stuff is expensive. And that is because they are ARTISTS, not BOATERS. Wait until someone take the same product and puts it in a box written "marine" on it, you'll see. For a boater, this stuff is a hidden gem. I was looking for a better alternative than the overpriced marine-tex and other crappy epoxy available in the marine world, not even because of the price, but because of: 1/ the crazy toxicity of the marine products 2/ the ridiculously short working time 3/ the hard to smooth, impossible to shape texture 4/ the necessity to sand forever after it dries (because you couldn't get it perfectly to shape). 5/ the waste of half of the product on the mixing surface and mixing stick, and the other half while sanding the excess (yes, I know, that makes 100%. I'm exaggerating, but just a little) THIS PRODUCT IS A MIRACLE. Let me list here the amazing benefits of this product: 1/ it is epoxy. This means super strong, waterproof, UV-resistant, can be used inside, outside, underwater, under the water line, on wood, on fiberglass, on metal, on whatever you throw at it. Epoxy rules. 2/ it is EASY to mix and work with. As easy as play-doh. 3/ it is VERY EASY to smooth/shape/blend! just put soapy water on your finger and it becomes a magic wand. you can blend pieces together, smooth them out, just by passing a finger on top. Crazy. 4/ there is a GREAT working time of over 2 hours. No rush, mistakes can be corrected easily. 5/ there is virtually NO WASTE, as every little piece of it can be collected and reused (within the 2 hours). This makes this product infinitely cheaper than any other epoxy mix, where the waste is the major part of the product. 6/ it doesn't create an expensive mess. It is easy to clean, easy to apply, easy, easy, easy. 7/ it SAVES A TON OF TIME. The ability to smooth it, reuse it, cut it, modify it, work on it without rushing, makes it possible to create a finish product in one step, with no need for sanding, no need for cleaning (both can be very time consuming with regular epoxy / fiberglass). 8/ it is NOT TOXIC like other epoxy! No crazy fumes when mixing, and the product won't burn a hole through your hands if you hold it. In fact, you can be in direct contact without feeling anything, and cleaning your hands after is a breeze. No more working with a respirator and gloves! As a disclaimer, I'd say that I don't know for a fact that it is not toxic, but it doesn't feel or smell toxic in any way. If you've been working with marine-tex, you'll know what i mean. 9/ Of course it dries by itself, which is normal for an epoxy, but I guess that if you're an artist, you care about that (as opposed to clay). This stuff is my new religion. Seriously. One thing, though: it is NOT WHITE. it is a light shade of gray, very pleasant, but not a white. However, it is epoxy, and can be tinted, painted, stained, varnished, whatever you need to do to color match (which is always necessary anyways, even for white on white). BOATER FELLOW, DIYers, Homeowners, BUY THIS STUFF! As for artists, I don't know how it compares to other products, but my guess is that it will be pretty hard to beat this champ.

Je m'en suis servie pour customiser une pop DIY et c'est tout simplement parfait ! Facile à travailler. Par conter, ça sèche vraiment vite, il vaut mieux faire plusieurs séances de petits travaux pour éviter d'en jeter. Mais vraiment, le résultat est top et la peinture adhère bien dessus !