TARION Desk Camera Mount Stand Heavy Duty Articulated Camera Arm Articulating Table Mount Stand Adjustable Flexible Gear Joints TKA01-L

I bought two of these desk-mount camera holders before I bought this one. The thing is I have a very limited amount of space. I have 3 monitors that I use on my computer. two of which are 27" displays, and one is a 32" display. Back when I only had the two 27" displays, I was able to use a gorilla pod and i had it just sitting on the desk to the right of my monitor. But when I upgraded to the 32", the camera was overlapping a lot of my screen. I moved the other 27" monitor to a desk-mounted arm that essentially has it floating off the table. But there was no room for the camera without blocking my screen. I tried a few different mounts that advertised being sturdy and being able to hold more than the weight I needed. but they all failed in one way or another. Either they wouldn't actually hold the advertised weight, or they would just shake a lot from just typing on my computer. Or they wouldn't be able to adjust to the exact height, angle, and area that I wanted it to be. When I bought this one, I was skeptical because of the price. but after setting it up and seeing how it works, I am totally a fan! because of the design of the elbows, its able to rotate and tilt in almost any direction imaginable. I was able to bring it down low and turn it to fit into the super awkward gap between the two monitors that I have. In fact, now with this device, I can scoot the screens closer together and just leave the lens of my DSLR camera peaking through. The best part is, even if i purposely shake my desk, it doesn't move much, so it seems very sturdy. even tapping on it with a little pressure doesn't make it sag or move around or anything. which I think is perfect! The other ones i had would sag if bumped. This one, once tightened, doesn't sag at all! It did come with a small ball head that would work well. But I wanted more adjustments and the ability of using a quick release, so I used an old ball head from Neewer that I don't use. Overall, I am very pleased with this purchase!

I recently bought the TARION Desk Camera Mount Stand for my streaming setup, and I have to say, it has completely exceeded my expectations. I use a heavy mirrorless DSLR with a lens, which can sometimes be a challenge when finding a mount that can support the weight without wobbling or compromising stability. This stand does an outstanding job in that department. One of the standout features is how adjustable the mount is. Whether I’m aiming for a high-angle shot, low-angle close-up, or something in between, I can easily tweak the positioning to suit my needs. The versatility here is a game-changer for content creators, as you can find that perfect angle every time. Another impressive aspect is its sturdiness. The build quality feels solid, and the stand is made from materials that don't feel cheap at all. No flimsy plastic or questionable joints—just a well-constructed piece of equipment that can handle the weight of my camera without even flinching. It’s clear that TARION didn’t cut corners with this one. Unlike some other camera stands that might use lightweight parts that don’t inspire confidence, this one feels premium and built to last. It's perfect for streamers, photographers, and anyone who needs a reliable, heavy-duty mount for their camera. Overall, if you’re looking for a quality camera stand that’s both adjustable and sturdy enough for a heavier DSLR setup, the TARION Desk Camera Mount Stand is definitely worth considering. It’s an investment that will likely serve you well for years to come.

Works as advertised, but not adjusted easily. Alot of different knobs you have to loosen and tighten

I use this for my Insta360 Ace Pro with attachments on. I also used it on my Samsung S25 and it fits great without a case. With a case, it fits a bit tight, so I'm not sure if it can handle larger phones. Overall, good product.

I have an L-shaped desk facing the wall, the monitor sits in the corner, and the DSLR is behind the monitor, leaving little room for a camera stand. The TARION Mount Stand solves the issue in two ways for me: 1) it doesn't have bulky screws on the back of the base clamp, so it doesn't create an obstruction, giving me plenty of room to mount it to the desk, 2) the folding arms allow me to position my camera away from the wall and based on the monitor height. The frame and material are sturdy, supporting the DSLR weight, with no sagging whatsoever, the knobs are tight and also sturdy, but they are a little cumbersome to adjust since those little metal coin thingies are tricky to change. This is more suited for stationary camera rigs. I can finally look as good in my meetings as I do in person; a thank you.

Item works as advertised, but not a very intuitive produce to use. Adjustments are a bit fiddly, taking longer than it should to adjust between sets. Will hold weight as advertised, but using a tooth and clamp method which is sure to wear out unless very conscientiously adjusted each time. All in, its a decent enough arm to set up once and leave in place. Or, infrequently anyway. But for a daily use arm in a commercial environment, it won't work. I returned to Amazon and got a more pro-friendly piece of hardware.

My dslr and lens are heavy enough to have not worked well with several different tripod designs for my desk. It is always hard to get the right angle. My camera would often tip unless I had it just right on the desk (very small tripods). This has been great. I was able to free up space and get the exact angle I wanted and needed. Now that it is set, I need to make sure I stay in that frame because it isn't the quickest adjust when it is tucked behind everything.

Doesn't go together. Not sure if defective or simply a piece of garbage, but the two sections that are supposed to go together won't fit as the screw to screw hole dimensions are completely different. Either way, considering there is no other part on this device that looks like either the male or female end of this, it tells me this is a piece of garbage with astoundingly bad quality control. The only possible way that could happen is it's a piece from a different device entirely that somehow was manufactured into this thing. Completely useless piece of gear going to live 500 years in a landfill.

Easy to assemble and really sturdy. The joints lock in rock solid and it gives the impression of being able to handle much more weight than what I have connected to it.

Ho acquistato questo braccio articolato TARION per avere un supporto da tavolo versatile per fotocamera e accessori. La costruzione è solida e dà subito una sensazione di stabilità: il morsetto si aggancia bene al piano e non si muove, anche con attrezzatura non leggerissima. Il braccio offre una buona escursione e tiene la posizione senza cedimenti, caratteristica importante soprattutto per riprese top-down, webcam professionali e microfoni. Il sistema di regolazione è fluido e permette di trovare rapidamente l’angolo di lavoro. Il fatto che sia inclusa la filettatura da 3/8” a 1/4” lo rende compatibile con la maggior parte delle fotocamere, luci e accessori da content creation. Non è leggerissimo, ma questo contribuisce alla stabilità generale. Per set-up molto pesati serve comunque verificare bene il serraggio, ma per DSLR leggere, mirrorless, smartphone, luci o microfoni è più che sufficiente. Pro • Struttura solida e stabile • Morsetto da tavolo molto robusto • Buona regolazione e tenuta della posizione • Filettatura adattatore inclusa Contro • Non il più leggero (ma è un vantaggio per la stabilità) • Va serrato bene con setup pesanti In sintesi: supporto affidabile, ben costruito e versatile. Perfetto per chi crea contenuti da scrivania e vuole un sistema stabile che si regola velocemente.

Using this for an old DSLR to do a top down view of my workbench. Works pretty well and is very stable. Probably getting another one.

I couldn’t be more pleased with the TARION Overhead Tripod Camera Desk Mount! I’ve gone through my fair share of mounts and tripods, but this one has truly exceeded my expectations. First off, the 360° flexible articulating arm is incredibly sturdy and offers precise control over positioning. Whether you’re using it for overhead shots or adjusting the angle for a close-up, it’s easy to find the perfect setup. The 3/8'' screw and included 3/8'' to 1/4'' screw adapter make it compatible with a wide range of equipment, from DSLR cameras to projectors and even ring lights. The build quality is top-notch, with a solid, heavy-duty design that gives me confidence that it will hold my camera or light securely. The arm is also surprisingly smooth to adjust, and I love how it locks in place without any slipping or wobbling. It’s perfect for my desk setup, and I can use it for everything from streaming and filming tutorials to setting up my projector for presentations. What I especially love is the space-saving design. It mounts easily to the desk without taking up too much room, and I can quickly reposition it when needed. Whether you’re a photographer, streamer, or someone who needs a reliable tripod mount for various devices, this product is an excellent choice. Highly recommend it!

This is a strong desk mount with versatility. Good value for your cash. I bought 2 of this and mounted them for my preferred configuration. It functions excellentlyand mountable for sure.