VIVOSUN 2-in-1 Grow Tent, 36"x24"x53" High Reflective Mylar with Multi-Chamber and Floor Tray, 3x2 for Hydroponic Indoor Plant

Assembly was pretty straight forward, although the instructions were really poor, actually sliding on the mylar was a bit challenging , however it was nice and thick and no worry of tearing. The middle divider wall was also a bit tricky and took a second person pushing outside the tent to fully secure down , but once in place seems pretty firm , overall i am satisfied with the thickness and quality of the tent at this price, no harsh chemical smells, and all pretty straightforward assembly. as for the Cons, although not many there are a few, for starters there were lots of loose threads i had to burn off, and the metal frame is rather weak, ive seen people literally hang off competitors frame bars , with no bend, but if i tried that it would collapse , that being said its not weak and can hold both the light and vent fan no problem , there were also light leaks around each zipper, and down each side of the tent in random patches, lucky i do not need it in a dark room , because if i did i would most certainly remove a star for light leaks, the front is actually rather bad , that being said i dont really have anything else to complain about , especially at this price point , id say the only difference between this option and say something 200 dollar more expensive would come down to a very SLIGHT increase in thickness, and thicker metal bars, if its really needed ... that is subjective Will update after first grow with more details!

Esta como se menciona en medidas un poco pequeño, y los paneles para separar las áreas se pega con velcro y una con la pura charola lo cual no se puede tener un total control.

La carpa en buena, el problema es que tiene muchas fugas de luz por los zipper y la parte que divide el tent por dentro, se pega con Velcro, lo cual tembien deja muchas fugas de luz hacia ambos lados, si eso no te importa por lo demás esta bien.

2-n-1 grow tent. Assembled the tent in about an hour by myself. Would suggest 2 people to make initial setup go smoother. Instructions need an overhaul. Setup examples showing placement/installation of lights and air handling with the tent would be helpful. Nice heavy material, zippers are good, I could only find a few pin holes on the seam for the very poorly placed tool storage bag. This should have been placed somewhere else not in the middle of a sidewall. I will be removing this. Had to fight with several of the poles as hole alignment wasn't great. Duct holes aren't in great locations either. Separator for veg/flower area didn't quite fit perfectly, uses velcro to attach, however the frame poles prevent this separator from attaching in the corners and from blocking 100% of light from other chamber. Its ok but requires a user solution to make it correct. requires additional air handling for the veg/clone chamber. In my opinion, tent needs cross members for side walls in 4x4 chamber, with the air cleaner running the sides get sucked in. Although I'm pleased by how air tight the tent is, now there is less space for plants. The 3 screened air holes let in too much light, the provided covers have velcro on all edges. So its air flow with lots of outside light or less air flow and no light, Again user work around required or add an intake fan and ducting. Althought 2 poles are included, another pole for hanging equipment would be very handy, 2 poles for the light and air cleaner and fans is very awkward. No hanging support for lower section of veg/clone area. Would like to put some lights there but Not comfortable attaching anything to the wire shelf. Basically it's a good sized tent, with some design short comings, none of which are deal breakers, i will be using the tent mostly as a single tent vs 2n1. Despite my criticisms this is still a good value, i do like it, I would buy it again. I would buy this tent 60x48x80 vs a 48x48x80(vivosun) - only 20-30$ more for the additional space.

Received as a gift for starting my garden plants indoors, we have a really short growing season. The bars are sturdy, all metal, with push button lock into place connections, also metal, so no tools are required to set up, and obvious that it can handle disassembling/reassembling time and again. I’m pretty handy, and was able to do it myself in about an hour and a half. It would have been much faster with help, and if the instructions had been more useful. What you see in the photo is all you get. 1 tiny schematic that happens to be wrong. Missing instructions for corner pieces and support bars for the shelf, which I spotted before getting too far and counted all of the parts to see what it must be. Additionally, the tent does NOT go on from above as the photo indicates, but instead has a base that is attached by a kilometre of zipper. Had I known this, I would have assembled the bars inside the tent instead of wrestling it in afterwards. This was the slowest part of the whole process. At 80” tall, I’m not sure how anyone would have accomplished it had it been expected to go on from above. A better instructional sheet or leaflet would push this to 5 stars. The frustration of errors making it far more difficult than it needed to be is the only negative thing I have to say about this. My herbs, peppers and tomatoes are happily waiting transplant, and I suspect I’ll be able to keep herbs and greens alive all winter in here. For those growing other things- there are lots of openings for ventilation set ups and whatever else you may need, with good Velcro on black out panels.