Hidden cabinet hinges

Worked perfect for the cabinet doors I put on. Great value for the money. Used some door stoppers to quieten the closure. Fit well. Easy to install with close attention to the instructions.

These hinges work great in my application: as vertical hinges on the door of my homemade galley box for my dinghy cruiser (sailboat). The retraction is quite strong, holding the door (5/32 plywood, approximately 7 inches wide by 8 inches tall) firmly against the door stops when closed, and strong enough to support a small pan or kettle on the door when it is open. I wish I could share pictures, but the box is currently disassembled for finishing. I'm sure that woodworkers and hobbyists could find many applications for these hinges, for cabinet doors and such. Nice quality.

Much the same as many reviewers have noted. 1) These come without instructions. Go to the product listing and look at the photos carefully to figure it out. You may want to temporarily screw them to two pieces of scrap wood to see just how they work and for spacing. 2) It may seem at first that they don't work and won't bend. They will, but when they aren't attached to anything you don't have much leverage, and the way they bend is a little inobvious. You *can* open and close them with just your fingers (but don't get pinched), but it may take some fooling around to figure it out. 3) They come with non-ideal screws. You really want pan-head screws about the same size. 4) These are not 'normal' hinges! These are hidden hinges and/or for situations where one moving part needs to be extended outward to clear the non-moving part. If you're not sure why you need this specific type of hinge, odds are good that this isn't the type of hinge you need. I've installed them, though, and they work fine, and they seem sturdy. Price is good. Packaging, etc, not so good. I'd buy them again if I needed more, but it helps that I've got some practice with these now.

Holds cabinet door in my RV open and closed really well with no lock reeded. Can't recommend these enough.

This is my 3rd attempt at finding the right style of hidden hinges for my fold-down cabinet. This one finally works! MY particular configuration is complicated by the fact that its not in a stand-alone cabinet. It has drawers above and below the fold-down panel. And what I really appreciate is that this set of hinges that came with clear installation Instructions.

Average hinges. THEY ARE NOT SOFT CLOSE THE VERY LEAST. I like that they require no drilling and makes it especially easy for anyone to install them

I did not install them yet, but I tested them with some scrap woods. It was really easy to install. The instructions for different mounting options were easy to follow.

we plan on adding a flip down front to a set of bookshelves to act as a bar surface. the 2 requirements were that the panel would be inset and that when open the panel was at the same level as the shelf it was attached to. so far we have only experimented with scrap lumber, but these seem to do the trick. there are no directions. we used the graphic in the product description to figure out which end goes on the panel and which goes on the door. we used measurement shown in the graphic marked inset as a starting point (though it seems the images for partial and full overlay were reversed). using the slotted holes there was ample space to fine tune the fit. as other people have mentioned, they come with bugle head screws. we’ll replace them with pan head screws when we do the real installation.

Disappointed with the quality, only two out of the 8 that I ordered were of any use. The ones I had on the doors that I was going to replace were in better condition

Me encantaron las quería para puertas de armario y quedaron super bien

Well made, easy to install, clear instructions.

ممتازة

buen precio, buen tiempo de entrega..