UMC22 Audiophile 2x2, 48 kHz USB Audio Interface with Midas Mic Preamplifier | For Recording Microphones and Instruments

Like just about everything Behringer makes at this price point, the UMC22 is chiefly one thing: cost-effective. You don't get best-in-class sound quality. You don't get a flashy brand name. You don't get the most features. What you do get is an audio interface that works, and honestly does a surprisingly good job. Setup is easy. Plug it into your computer. USB2 is fine. Plug in your headphones. Plug in your monitors. Plug in your mics/instruments. Done. Drivers aren't obscure or finicky. Don't worry about it. Outputs in the rear need two 1/4" TR cables for left and right channel. Output in the front needs a 1/4" TRS cable. Make sure you've got semi-decent studio headphones and/or monitors, too - an audio setup is only as strong as its weakest link, and if you're looking up 1/4" adapters for your Beats or whatever, maybe skip this and invest in better headphones instead. Craftsmanship's okay. It's a Behringer audio interface, not an SM-58. I wouldn't go throwing it down flights of stairs for fun. You have two audio inputs - the XLR/TRS hybrid jack going through the Midas preamp, and the second TRS jack that goes through a Xenyx preamp. Neither are particularly touted for their sound quality (the Midas is better than the Xenyx by far, though), but it's miles above motherboard-integrated stuff. Both can record at 48KHz tops - as far as I'm concerned, if you're looking at this interface instead of something higher-end, that's plenty. The "direct monitor" button you see on the front ducks your computer sound output and lets you listen to your connected inputs through the hardware, which has its uses. The interface outputs to headphones and to external monitors by means of 1/4" TRS and TR cables, respectively. Sound is clean - mind you, my ears aren't well trained to that sort of thing, and if yours aren't either then the sound quality should be fine. It's important to note that it will always output to both headphones and monitors - if you want to listen to just headphones or just monitors on-the-fly, this won't provide a convenient solution to that. It does, however, eliminate the need to go through your OS's sound system, which can be useful when working with ASIO or CoreAudio exclusive modes to reduce latency. If you want the best and have the money to back up your needs, consider looking elsewhere. Again - an audio setup is only as strong as its weakest link. But if you want the pretty solid, and you're on the kind of budget that has you saving up for purchases like these, I think you can't go wrong with the UMC22, or the U-PHORIA series in general. TL;DR: It's cheap. It's fine. If you need it, get it.

This Behringer UMC22 sounds really clear and makes my guitar and mic sound awesome. It’s easy to plug in and start recording without any trouble. For the price, it works great and feels like a really good deal.

Very good interface for its price range. Great midas pre amps, always reliable. a little bit too much noise floor is a bit too high for my liking. but overall, as i said, for the price, it is awesome! even better than focusrite ones. This one, believe me, it will not give you headaches with drivers or anything like that, feels great overall, works great. The only downside i see, is that it can only work at 16 bits of depth, which could be a big drawback for you, or not...

As an audio engineer and musician for well over three decades I have learned two things in my journey: 1) That more complicated audio interfaces are not necessarily better sounding nor easier to contend with than less expensive ones, especially when their drivers create an ongoing nightmare, turning your recording sessions into a saga of hardware issues, crashes and annoyance. And 2) Simplicity truly is the art of invention. Having said that, I'd been using a Saffire Pro40 for the past several years. First downside was FIREWIRE. Ugh! I'm running Windows 10 and Pro Tools 11 and things worked okay but Windows doesn't like old Firewire cards too much and drivers were a problem. Also, the Pro40 was problematic all its own, with having to turn it off and on after it got hung up for some unknown reason, and it's native mixer/controller interface was a nightmare. Got to the point where I just didn't want to mess with recording anymore, so I took a break. After several months abstaining from recording, I decided to see if I could get PT11 working with my standard Windows audio, the build-in sound on my Asus Sabertooth X99 board, and with the help of ASIO4ALL bingo! That worked nicely, but then I didn't have any way to get an XLR studio mic into my machine. Should I put dig the Pro40 out and hook it up? Heck no! What to do... I shopped around for a USB audio interface and the Behringer UMC22 looked really promising. I was looking for something with one XLR-in for a mic, but the 1/4" Instrument input is nice to have as well. All I needed to do in PT was go into the setup and open the ASIO4ALL control panel and select the "generic USB audio device" (or something along those lines) and wala! It works great! I really appreciate the "Live Monitoring" button option as there is a bit of latency without it, but that might be something I can iron out, though it's not a problem really, and far, far less a problem than having to deal with a futzy Firewire-based one. I don't hate Firewire by the way, just not happy at all with the Pro40. They sound amazing, when they're working properly, but... anyway... I used an SM57 as my first test mic and that sounded very good. Then I switched to a Sennheiser E935 and it sounds great! Crisp highs, solid mids and good lows. Sweet! I have not tried anything requiring phantom power yet, but I'm sure it'll sound fine. I have not tried recording anything thru the instrument input, but I'm sure it sounds fine. This thing is great. Get one! It works very well and while it may not have quite the lushness of more expensive mic pre's, it's as simple as plug in the cable and go. Not bad! Metal case. Decent buttons and switches. Taken care of it should last some good years. Hope this was helpful. Jam on!

Absolutely amazing low-price audio interface. Perfect for people who want to have a headphone and microphone setup for their PC's. Lightweight, nice volume controls on the device separate from the volume on the PC so you can mix the sounds yourself. No software required and easy to use. Plug and play pretty much.

A interface é muito boa pelo preço. Atende as minhas necessidades para gravar usando microfone XLR e um instrumento com cabo p10. O monitoramento não possui delay e o volume que oferece é muito alto, não tem necessidade de colocar no máximo, provavelmente vai ficar surdo. Porém nem tudo são flores. Ela não tem driver nativo e oferece a instalação de um genérico que não é necessário e não acrescenta em nada. Notei que pode ocorrer alguns pequenos estalos quando se abre alguma aplicação com som no Windows e só resolve reiniciando o computador. O site da Behringer oferece softwares para midi, editar e masterizar os áudios mas não utilizei. No geral me serviu muito bem, recomendo.

Es una muy buena interfaz para iniciar el hobbie de la música oh hacer música, la recomiendo bastante, los materias de construcción son muy buenas (de aluminio) si la cuidas bien te puede durar mucho tiempo, un muy buen producto por su precio Calidad precio 😌

気にいったこと、音良かったです。 お値段が安く、音は僕は十分です。 キレイでしたです。 気になった事、少しつないで１日使えなかったです。理由はわかりませんでした。 その後すぐ使えるようになりましたです。 ネットはつないでいます。

I have been using it for 3 years and i never faced any problem with it. The best quality.

metal body with good quality, it run stable and provide a clean sound to my expectation. simple and easy to use for a general user, nice to have.